Dell Vostro 15 5510 Service Manual - Page 35

Fan, Removing the fan

Get Dell Vostro 15 5510 PDF manuals and user guides View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

2. Align the notch on the wireless card with the tab on the wireless-card slot on the system board. 3. Slide and insert the wireless card at an angle into the wireless-card slot on the system board. 4. Align the screw hole on the wireless-card bracket to the screw hole on the wireless card and system board. 5. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Fan Removing the fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following images indicate the location of the fan and provide a visual representation of the removal procedure. Steps 1. Disconnect the fan cable from the system board. 2. Remove the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly. Removing and installing components 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
2.
Align the notch on the wireless card with the tab on the wireless-card slot on the system board.
3.
Slide and insert the wireless card at an angle into the wireless-card slot on the system board.
4.
Align the screw hole on the wireless-card bracket to the screw hole on the wireless card and system board.
5.
Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Fan
Removing the fan
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
About this task
The following images indicate the location of the fan and provide a visual representation of the removal procedure.
Steps
1.
Disconnect the fan cable from the system board.
2.
Remove the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly.
Removing and installing components
35