Dell Vostro 15 5510 Service Manual - Page 44

Speakers, Removing the speakers

Get Dell Vostro 15 5510 PDF manuals and user guides View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Steps 1. Slide the I/O board into the slots on the palm-rest and keyboard assembly. 2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly. 4. Connect the power-button with optional fingerprint reader cable into the connector on the I/O board and close the latch to secure the cable. 5. Connect the coin-cell battery cable to the I/O board. 6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable. 7. Adhere the tape that secures the I/O-board cable to the I/O board. 8. Close the left display hinge. 9. Replace the three (M2.5x4.5) screws that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the network-port bracket. 2. Install the base cover. 3. Exit Service Mode. 4. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 44 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Steps
1.
Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2.
Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3.
Replace the screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly.
4.
Connect the power-button with optional fingerprint reader cable into the connector on the I/O board and close the latch to
secure the cable.
5.
Connect the coin-cell battery cable to the I/O board.
6.
Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7.
Adhere the tape that secures the I/O-board cable to the I/O board.
8.
Close the left display hinge.
9.
Replace the three (M2.5x4.5) screws that secure the left display hinge to the palm-rest and keyboard assembly.
Next steps
1.
Install the
network-port bracket
.
2.
Install the
base cover
.
3.
Exit
Service Mode
.
4.
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
44
Removing and installing components