Dell Vostro 15 5510 Service Manual - Page 56
System board connectors, Battery cable connector
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Remove the memory module. 5. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive from M.2 slot one, whichever applicable. 6. Remove the M.2 2230 solid-state drive from M.2 slot two, if applicable. 7. Remove the wireless card. 8. Remove the fan. 9. Remove the heat sink. About this task NOTE: When removing the system board to replace/access other parts, the system board can be removed and installed with the heat sink attached in order to simplify the procedure and preserve the thermal bond between the system board and heat-sink. The following image indicates the connectors on your system board. Figure 1. System board connectors 1. Display cable connector 2. Power-adapter port cable connector 3. Keyboard backlit cable connector 4. Keyboard cable connector 5. Touchpad cable connector 6. Battery cable connector 7. Fan cable connector 8. Speaker cable connector 9. I/O-board cable connector The following images indicate the location of the system board and provide a visual representation of the removal procedure. 56 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/56.png)