Dell Vostro 15 5510 Service Manual - Page 54
Installing the power-adapter port
![]() |
View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps 1. Remove the three (M2.5x4.5) screws that secure the right display-hinge to the system board. 2. Open the display hinge at an angle of 90 degrees. 3. Disconnect the power-adapter port cable from the system board. 4. Peel the tape that secures the power-adapter port cable to the system board. 5. Remove the power-adapter port cable from the routing guide on the palm-rest and keyboard assembly. 6. Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly. Installing the power-adapter port Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure. 54 Removing and installing components
![](/manual_guide/products/dell-vostro-15-5510-service-manual-097ffc9/54.png)