Dell Vostro 15 5510 Service Manual - Page 20

Battery cable, Removing the battery cable

Get Dell Vostro 15 5510 PDF manuals and user guides View all Dell Vostro 15 5510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Steps 1. Using the alignment posts, place the 4-cell battery on the palm-rest and keyboard assembly. 2. Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly. 3. Replace the four (M2x3) screws that secure the 4-cell battery to the palm-rest and keyboard assembly. 4. Connect the battery cable to the system board. 5. Adhere the tape that secures the battery cable to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working on your computer. Battery cable Removing the battery cable Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery or 4-cell battery, whichever applicable. NOTE: If battery is disconnected from system board for service, then there is a delay during system boot as the system undergoes RTC battery reset. About this task The following images indicate the location of the battery cable and provide a visual representation of the removal procedure. 20 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Steps
1.
Using the alignment posts, place the 4-cell battery on the palm-rest and keyboard assembly.
2.
Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the four (M2x3) screws that secure the 4-cell battery to the palm-rest and keyboard assembly.
4.
Connect the battery cable to the system board.
5.
Adhere the tape that secures the battery cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working on your computer
.
Battery cable
Removing the battery cable
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
3-cell battery
or
4-cell battery
, whichever applicable.
NOTE:
If battery is disconnected from system board for service, then there is a delay during system boot as the system
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
20
Removing and installing components