Dell Z9100 EMC PowerSwitch –ON Installation Guide March 2021 - Page 23
Z9100-ON switch installation, 1U front-rack installation
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Figure 12. Four-post threaded configuration 2. For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end, item 2. Z9100-ON switch installation You can mount the switch in the 1U front-rack or 1U two-post flush and center configurations. The following is an example of a front-rack configuration. For the 1U two-post flush and center configurations, slide the switch into the rails in the same manner as the four-post configurations. 1U front-rack installation Configure the rails that are attached to the switch. 1. Attach the inner switch rails to the Z9100-ON switch. Item 3 shows the detail for the front standoff with the locking tab. Z9100-ON installation 23
Figure 12. Four-post threaded configuration
2.
For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end, item 2.
Z9100-ON switch installation
You can mount the switch in the 1U front-rack or 1U two-post flush and center configurations. The following is an example of a
front-rack configuration.
For the 1U two-post flush and center configurations, slide the switch into the rails in the same manner as the four-post
configurations.
1U front-rack installation
Configure the rails that are attached to the switch.
1.
Attach the inner switch rails to the Z9100-ON switch.
Item 3 shows the detail for the front standoff with the locking tab.
Z9100–ON installation
23