Dell Z9100 EMC PowerSwitch –ON Installation Guide March 2021 - Page 39

9 Specifications This topic lists the Z9100-ON specifications. CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C). CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions. NOTE: For RoHS information, see Restricted Material Compliance. Topics: • Switch physical design • IEEE standards • Agency compliance • USA Federal Communications Commission statement • European Union EMC Directive Conformance statement • Japan VCCI Compliance for Class A Equipment • Korean certification of compliance • Safety Standards and Compliance Agency certifications • Electromagnetic Compatibility • Product recycling and disposal Switch physical design Table 7. Switch physical design Parameter Height Width Depth Chassis weight with factory-installed components Rack clearance required Table 8. Environmental parameters Parameter Operating temperature Operating humidity Specifications 1.72 inches (44 mm) 17.1 inches (434 mm) Chassis: 18.2 inches (462 mm) Handle: 1.57 inches (40 mm) 19 lbs (2* PSUs) 8.62 kg (2*PSUs) Front: 5 inches (12.7 cm) Back: 5 inches (12.7 cm) Specifications 32° to 113°F (0° to 45°C) NOTE: Reduce maximum temperature by 1°C/300 meters (1°F/547 feet) above 950 meters (3,117 feet). 5 percent to 85 percent (RH), non-condensing Specifications 39