Dell Z9100 EMC PowerSwitch –ON Installation Guide March 2021 - Page 40

Table 8. Environmental parameters (continued) Parameter Storage temperature Storage humidity Maximum thermal output Maximum operational altitude Maximum non-operational altitude Shock Table 9. AC power requirements Parameter Power supply PSU maximum power capability Typical power consumption Table 10. DC power requirements Parameter Minimum and maximum input voltage range Input power at full load Input current at full load Start up VDC Start off VDC Specifications -40° to 158°F (-40° to 70°C) 5 percent to 90 percent, non-condensing 292.42 BTU/hr 85.7 W 10,000 feet (3,048 meters) 39,370 feet (12,000 meters) SV0115 - ODM Specifications 100-240 VAC 50/60 Hz 606 Watts 288 Watts Specifications −48, -60V DC, 32A Max −40.5 V/970 W −48 V/930 W −60 V/950 W (without fan) −40.5 V/980 W −48 V/940 W −60 V/960 W (with fan) −40.5V/23.8A −48V/19.0A −60V/15.6A (without fan) −40.5V/24.0A −48V/19.2A −60V/16.0A (with fan) 39.0+/−1.5 V 37.5+/−1.5 V IEEE standards The Z9100-ON complies with the following IEEE standards. ● 802.3ab Gigabit Ethernet (1000BASE-T) ● 802.3ae 10 Gigabit Ethernet (10GBASE-X) ● 802.3ba 40 Gigabit Ethernet (40GBase-SR4, 40GBase-CR4) on optical ports ● 802.3ba 100 Gigabit Ethernet ● 802.3bj 100 Gigabit Ethernet ● 802.3bm 100 Gigabit Ethernet Agency compliance The Z9100-ON is designed to comply with the following safety and agency requirements. USA Federal Communications Commission statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designated to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and 40 Specifications