Dell Z9100 EMC PowerSwitch –ON Installation Guide March 2021 - Page 8
LED behavior, Table 1. Z9100-ON LED behavior
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
LED behavior The following Z9100-ON switch LED behavior is seen during open networking installation environment (ONIE) operations: Figure 4. Z9100-ON LEDs 1. Master LED 3. Locator LED 5. SFP+ LED 7. SFP+ LED 9. Fan LED Table 1. Z9100-ON LED behavior LED Master LED Switch LED Locator LED SFP+ LED RJ45 Ethernet Port LEDs Stacking ID Management Port LED 8 The Z9100-ON switch 2. Switch LED 4. QSFP28 LED 6. Stack ID 8. RJ45 Ethernet Management Port LEDs 10. Power LED Description ● Off-Switch is in Stacking Slave mode. ● Solid Green-Switch is in Stacking Master or Standalone mode. ● Off-No power. ● Solid Green-Normal. ● Blinking Green-POST is in process. ● Solid amber-Major system error. ● Blinking amber-Minor system alert. ● Off-Locator is idle. ● Blinking blue-Locator is functioning. ● Off-No link. ● Solid green-Link is active. ● Flashing green-port activity. ● Off-No link. ● Solid green-Link on maximum speed, 1 Gbps speed. ● Solid amber-Link on lower speed, 10/100 Mbps speeds. ● Flashing green-Port activity. ● Stack unit number. ● Off-No link or activity. ● Solid green-Port link on maximum speed. ● Solid amber-Port link on lower speed. ● Flashing green-Port activity.