Dynex DX-19LD150A11 User Manual (English) - Page 21

Changing channel settings

Page 21 highlights

Changing channel settings DX-19LD150A11/DX-22LD150A11 17 Changing channel settings Automatically searching for TV channels Before you can watch TV channels in your area, you need to let the TV/DVD combo scan for available TV channels and store them in the TV channel list. You do not need to scan for channels unless the available channels changed after you ran the Setup Wizard. For more information, see "Turning on your TV/DVD combo for the first time" on page 11. To scan for channels: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 2 Press or to highlight Channel. The Channel menu opens. 5 Press or to select Yes, then press ENTER to automatically start the scan. A progress box shows the progress of the scan. Auto Scan may take a while to complete. A progress report is displayed while your TV/DVD combo is scanning for available channels. After the digital channel scan is complete, you can continue to search for analog channels without pressing any buttons, or you can press EXIT to exit if you do not need the analog channel scan. You can press MENU or EXIT at any time to stop Auto Scan prior to completion, but you will need to run it later to complete the process. Auto Scan creates a list of available/receivable channels for the selected signal input. Hiding channels You can delete channels from the channel list so that your TV/DVD combo skips the channels when you press CH /CH . You can still tune to the hidden channel by using the number buttons. To hide a channel: 1 Press MENU. The on-screen menu opens with the Picture menu displayed. 3 Press or to highlight Air / Cable, then press or to change the setting to: • Air-VHF and UHF channels • Cable-Cable TV channels (no cable box). • Cable / Satellite Box-Cable or satellite TV tuner box. Channel auto search is not necessary if you select this option. 4 Press or to highlight Auto Channel Search, then press ENTER. A confirmation box opens. 2 Press or to highlight Channel. The Channel menu opens.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

Changing channel settings
17
DX-19LD150A11/DX-22LD150A11
Changing channel settings
Automatically searching for TV channels
Before you can watch TV channels in your area, you need to let the
TV/DVD combo scan for available TV channels and store them in the TV
channel list. You do not need to scan for channels unless the available
channels changed after you ran the Setup Wizard. For more
information, see “Turning on your TV/DVD combo for the first time” on
page 11.
To scan for channels:
1
Press
MENU
. The on-screen menu opens with the
Picture
menu
displayed.
2
Press
or
to highlight
Channel
. The
Channel
menu opens.
3
Press
or
to highlight
Air / Cable
, then press
or
to
change the setting to:
Air
—VHF and UHF channels
Cable
—Cable TV channels (no cable box).
Cable / Satellite Box
—Cable or satellite TV tuner box.
Channel auto search is not necessary if you select this option.
4
Press
or
to highlight
Auto Channel Search
, then press
ENTER
. A confirmation box opens.
5
Press
or
to select
Yes
, then press
ENTER
to automatically
start the scan. A progress box shows the progress of the scan.
Auto Scan may take a while to complete. A progress report is
displayed while your TV/DVD combo is scanning for available
channels. After the digital channel scan is complete, you can
continue to search for analog channels without pressing any
buttons, or you can press
EXIT
to exit if you do not need the
analog channel scan. You can press
MENU
or
EXIT
at any time to
stop Auto Scan prior to completion, but you will need to run it
later to complete the process.
Auto Scan creates a list of available/receivable channels for the
selected signal input.
Hiding channels
You can delete channels from the channel list so that your TV/DVD
combo skips the channels when you press
CH
/CH
. You can still tune
to the hidden channel by using the number buttons.
To hide a channel:
1
Press
MENU
. The on-screen menu opens with the
Picture
menu
displayed.
2
Press
or
to highlight
Channel
. The
Channel
menu opens.