Dynex DX-19LD150A11 User Manual (English) - Page 36

32 DX-19LD150A11/DX-22LD150A11 Specifications Problem Solution Picture has a few bright or dark dots Good picture, no sound Audio noise or static • A few bright or dark dots on an LCD screen is normal. It does not affect the operation of this TV/DVD combo. • Increase the volume. • Press MUTE to make sure that the sound is not muted. • Make sure that the audio mode is set to Stereo or Mono. For more information, see "Adjusting the sound" on page 15. • Move radio frequency communication equipment, such as a cordless phone, away from your TV/DVD combo. Remote control Problem Solution Remote control does not work Trouble programming your existing universal remote control. • Replace the batteries. For more information, see "Installing remote control batteries" on page 7. • Make sure that the batteries are inserted correctly. For more information, see "Installing remote control batteries" on page 7. • Make sure that the power cord is plugged into an AC power outlet. • See instructions and a table of common codes in "Programming a universal remote control" on page 8. • Codes are subject to change. For up to date codes, go to www.dynexproducts.com. • Replace the batteries. For more information, see "Installing remote control batteries" on page 7. • Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist. General Problem Cannot tune to one or more channels Cannot access some items Password is lost TV/DVD combo cabinet creaks Buttons do not work Solution • The program you want to watch may be blocked through the parental controls. For more information, see "Setting parental control levels" on page 20. • The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. For more information, see "Changing channel settings" on page 17. • If a setting or option is grayed out, it is not available in the current input mode. • On the Parental Controls menu, enter 9999 for the password, then set a new password. For more information, see "Setting parental controls" on page 19. • When you are using your TV/DVD combo, the temperature inside the cabinet increases. This causes the cabinet to expand or contract, which produces the creaking noise. This is not a malfunction. • Unplug the power cord for a few seconds, then plug it back in and turn on your TV/DVD combo. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV/DVD combo, then turn it on again. Specifications Design and specifications are subject to change without notice. Dimensions and weight are approximate. Models LCD Physical specifications TV DVD player DX-19LD150A11 DX-22LD150A11 DX-19LD150A11 Panel Resolution Color Viewing angle Contrast ratio Brightness (typical) Response time DX-22LD150A11 Panel Resolution Color Viewing angle Contrast ratio Brightness (typical) Response time DX-19LD150A11 DX-22LD150A11 Standard Tuning system Frequency range CATV Compatibility Disc compatibility 19-inch active matrix full high definition TFT 1366 x 768 6 bit with FRC/ 16.7 M 170° horizontal - 160° vertical 1000:1 250 nits 5.0 ms 22-inch active matrix full high definition TFT 1366 x 768 6 bit with FRC/ 16.7 M 170° horizontal - 160° vertical 800:1 400 nits 5.0 ms Dimensions (W × D × H) With stand: 18.5 × 7.19 × 14.37 in (470 × 182.5 × 365 mm) Without stand: 18.5 × 2.87 × 12.74 in (470 × 73 × 323.5 mm) Weight With stand: 9.48 lb (4.3 kg) Without stand: 8.82 lb (4.0 kg) Dimensions (W × D × H) With stand: 21.18× 7.24 × 15.63 in (538 × 184 × 397 mm) Without stand: 21.18 × 2.3 × 14.53 in (538 × 71 × 369 mm) Weight With stand: 10.8 lb (4.9 kg) Without stand: 10.14 lb (4.6 kg) NTSC and ATSC Electronic tuning system VHF and UHF 135 channel, QAM channels 480i, 480p, 720p, 1080i 12 cm Digital Audio CD CD-R CD-RW 12 cm DVD-Video DVD-R DVD-RW DVD+R DVD+RW DVD-R DL Dual Layer DVD-RW Dual Layer DVD+R Dual Layer DVD+RW Dual Layer