Dynex DX32E250A12 User Manual - Page 14
Connecting an antenna or cable TV no
View all Dynex DX32E250A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10 DX-32E250A12 Making connections Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Turn off your TV and all connected equipment. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Connecting an antenna or cable TV (no box) To connect an antenna or cable TV (no box): 1 Turn off your TV and all connected equipment. 2 Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. Back of TV Coaxial cable 4 Turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 18. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. Back of TV Coaxial cable 3 Turn on your TV. 4 Go through the setup wizard on page 18. Notes • • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem.