Dynex DX32E250A12 User Manual - Page 8

4 DX-32E250A12 Installing the stand or wall-mount bracket Installing the stand or wall-mount bracket Notes If you plan to wall-mount your TV, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket. To attach your TV to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the stand cover and stand to the TV, then remove the stand cover and stand. 2 Secure the stand to the screen with the four provided screws. Model DX-32E250A12 Screw type Screw length T4 type 25 mm 3 Secure the flat stand cover to the back of your TV using the four screws you just removed. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. 7.84 in. (200 mm) 3.92 in. (100) mm) Wall mount brackets