Dynex DX32E250A12 User Manual - Page 20

16 DX-32E250A12 Using the remote control Connecting a home theater system with multiple devices Note We recommend that you connect the AV receiver's HDMI OUT jack to your TV's HDMI1/DVI IN jack, and AV receiver's Audio IN to your TV's Digital Output jack when you: • Have a game console connected to one of your TV's HDMI2 IN jacks. • Watch a program through an antenna or cable TV connected to the ANT/ CABLE IN jack. Blu-ray player/DVD player/VCR Cable or satellite TV box Using the remote control Installing remote control batteries To install the remote control batteries: 1 Remove the battery cover. 2 Insert two AAA batteries into the battery compartment. Make sure that you match the + and - symbols on the batteries with the + and - symbols in the battery compartment. AV receiver 3 Replace the battery cover. Game console or camera USB flash drive Computer Antenna or cable TV connected directly to the wall jack The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information. Just remember to use the best connection types available for the best picture and sound. For information about connection types, see "What connection should I use?" on page 7. Cautions • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. • Make sure that batteries are disposed of correctly. Do not burn or incinerate. Aiming the remote control To aim the remote control: • Point the remote control towards the remote sensor on the front of your TV.