Epson 5040UBe Users Guide - Page 72
Changing the Image Aspect Ratio, Available Image Aspect Ratios, Aspect, Enter, Parent topic, Normal - black friday
View all Epson 5040UBe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. A list of the available aspect ratios appears. 3. To cycle through the available aspect ratios for your input signal, press the up or down arrow button. 4. Press Enter to select the aspect ratio. Parent topic: Image Aspect Ratio Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Note: When the projector is in 3D mode, the aspect ratio is automatically set to Normal. Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. Aspect ratio setting Auto Normal Zoom Description Automatically sets the aspect ratio according to the input signal. Displays images using the full projection area and maintains the aspect ratio of the image. Displays images using the full width of the projection area and maintains the aspect ratio of the image. 72