Epson C31CA85090 Reference Guide - Page 46
Selecting the BUSY Status, Printer BUSY Condition and Status of DIP Switch 2-1
View all Epson C31CA85090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Selecting the BUSY Status With DIP switch 2-1, you can select conditions for invoking a BUSY state as either of the following: • When the receive buffer is full • When the receive buffer is full or the printer is offline In either case above, the printer enters the BUSY state after power is turned on (including resetting with the interface) and when a self-test is being run. Printer BUSY Condition and Status of DIP Switch 2-1 Printer status Offline During the period after power is turned on (including resetting with the interface) to when the printer is ready to receive data. During the self-test. When the cover is open. During paper feed with the Feed button. When the printer stops printing due to a paper-end (when printer has run out of roll paper). When waiting for the paper Feed button to be pressed before macro execution. When an error has occurred. When the receive buffer becomes full. DIP SW 2-1 ON OFF BUSY BUSY BUSY - - - BUSY BUSY BUSY BUSY - - BUSY BUSY BUSY BUSY 46