Epson C31CA85090 Reference Guide - Page 61
Connecting the Ethernet interface cable
View all Epson C31CA85090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 Setup Connecting the Ethernet interface cable CAUTION When LAN cables are installed outdoors, make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, the devices can be damaged by lightning. Never attempt to connect the customer display cable, drawer kick-out cable, or the standard telephone line cable to the 10/100BASE-T LAN connector. Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the connector clicks into place. 10/100BASE-T LAN interface connector 016(146'.'%1//70+%#6+1075' -'+06'.'(10#05%*.755/ LED (Green) LED (Yellow) Switch Press down the switch for a while when the power is on to initialize to the factory settings. When using the Ethernet interface, the network configuration is required. Make the settings using TM-T88V Utility. 2 61