Epson C31CA85090 Reference Guide - Page 52
Setting the printer model, Setting the transmission speed for serial interface
View all Epson C31CA85090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting the power supply unit capacity Selectable from levels 1 to 3 (Low High) (initial setting: level 3) Setting the automatic paper cut • Not use this function (initial setting) • Cut paper when the cover is closed • Print logo when paper is cut Printing logo when paper is cut is not available with memory switch setting mode. Setting the paper reduction • Extra upper space reduction: enabled or disabled (initial setting) • Extra lower space reduction: enabled or disabled (initial setting) • Line space reduction rate: not reduced (initial setting), 25%, 50%, or 75% • Line feed reduction rate: not reduced (initial setting), 25%, 50%, or 75% • Barcode height reduction rate: not reduced (initial setting), 25%, 50%, or 75% Setting the transmission speed for serial interface When DIP switches 1-7 and 1-8 are set to ON, the value (initially 38400) can be set to 2400, 4800, 9600, 19200, 38400, 57600, or 115200. (See "Transmission Speed (DIP Switches 1-7/1-8)" on page 40.) Setting the printer model When you use the TM-T88V with the APD Ver. 4.00 ~ 4.04, you need to change the printer model name to "TM-T88IV." 52