Epson C31CA85090 Reference Guide - Page 96
Printable Area (for 80 mm Width Paper), Cutting Method, Manual Paper Feed, Receive Buffer
View all Epson C31CA85090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Printable Area (for 80 mm Width Paper) The printable area (left/right margins, print start position from the autocutting position, print start position from the manual cutting position) of the TM-T88V is the same as that of the TM-T88IV. Cutting Method The TM-T88V uses the partial cutting method (cutting with one point in left edge left uncut) as does the TM-T88IV. Manual Paper Feed Manual paper feed is not possible with the TM-T88V while it is possible with the TM-T88IV after printing pauses. Receive Buffer You can set the receive buffer of the TM-T88V to 4KB or 45 bytes with DIP switch 1-2 as with the TM-T88IV. The buffer full condition and buffer full release condition of the TM-T88V are the same as those of the TM-T88IV. Memory Capacity The sizes of the download buffer and NV graphics data of the TM-T88V are the same as those of the TM-T88IV. Electrical Characteristics The operating voltage of the TM-T88V is DC24 ± 7%, the same as the TM-T88IV. The current consumption differs, depending on the print duty. The TM-T88V does not have a low power consumption mode, which the TM-T88IV has, so you cannot set DIP switches 2-3 and 2-4 to on. Use the newly added low power load mode instead. 96