Epson C31CA85090 Reference Guide - Page 63
Connecting the Cash Drawer, Connecting the Drawer Kick-out Cable
View all Epson C31CA85090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 2 Setup Connecting the Cash Drawer When using a cash drawer, connect the cash drawer. Use the cash drawer handled by EPSON or your dealer. If the optional external buzzer is used, you cannot use a cash drawer. Connecting the Drawer Kick-out Cable Specifications of drawers differ depending on makers or models. When you use a drawer other than specified, make sure its specification meets the following con- WARNING ditions. Otherwise, devices may be damaged. The load, such as a drawer kick-out solenoid, must be connected between pins 4 and 2 or pins 4 and 5 of the drawer kick-out connector. When the drawer open/close signal is used, a switch must be provided between drawer kick-out connector pins 3 and 6. The resistance of the load, such as a drawer kick-out solenoid, must be 24 or more 2 or the input current must be 1A or less. Be sure to use the 24V power output on drawer-kick out connector pin 4 for driving the equipment. Use a shield cable for the drawer connector cable. Two driver transistors cannot be energized simultaneously. Leave intervals longer than 4 times the drawer driving pulse when sending it continuously. Be sure to use the printer power supply (connector pin 4) for the drawer power source. Do not insert a telephone line into the drawer kick-out connector. Doing so may damage the telephone line or printer. Connect the connector of the drawer kick-out cable to the printer. Drawer kick-out connector 63