Epson G7905UNL Users Guide - Page 184

Setting Direct Power On Sleep Mode Sleep Mode Timer High Altitude Mode Auto Source Search Auto Power On A/V Mute Settings BNC Sync Termination Options - - 1 to 30 minutes - - - Fade-in Fade-out - Remote Control Type Normal Simple Beep - 184 Description Turns on the projector when you plug it in Automatically places the projector in standby mode after an interval of inactivity Sets the time before the projector automatically turns off (Sleep Mode must be turned on) Regulates the projector's operating temperature at altitudes above 4921 feet (1500 m) Automatically select an input source If Computer or BNC is selected, the projector turns on when an input signal is detected Select the number of seconds for the transition effect Sets the termination for the signal from the BNC port (normally should be off unless analog termination such as for switchers is necessary) Select Normal to use the remote control that came with the projector or Simple to use a different Epson projector remote control and disable the remote control that came with the projector Turns on or off the beep that sounds when you turn the projector on or off