Epson G7905UNL Users Guide - Page 222

Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Make sure you selected the correct Screen Type setting for the screen being used. • Make sure the Scale setting in the Extended menu is turned off. • Try adjusting the image position using the Position menu setting. • Try adjusting the image position using the Screen Position menu setting. • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a full display. • Check the cables connecting the computer or video source to the projector. Try connecting different cables. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) Parent topic: Solving Image or Sound Problems Related references Projector Feature Settings - Settings Menu Input Signal Settings - Signal Menu Supported Video Display Formats Related tasks Adjusting the Image Position Using Lens Shift Setting the Screen Type Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape. 222