Epson LQ-510X User Manual - Page 91

Selecting an International Character Set International character sets provide you with the characters and symbols used in other languages. You can select one of eight international character sets by changing the DIP switch settings. Whenever the printer is turned on, reset, or initialized, the character set selected by the DIP switches becomes the default character set. To select an international character set, set DIP switches 1-1,1-2, and 1-3 according to the table below. Note: DIP switch 1-7 must be off. To select an international character set when DIP switch 1-7 is on, use the ESC R command. This table also shows the characters that differ in each international character set. Country 0 U.S.A. 1 France 2 Germany 3 U.K. 4 Denmark 5 Sweden 6 Italy 7 Spain ASCII code hex 23 24 40 58 5C 5D 5E 60 7B 7C 7D 7E DIP SW 1-1 1-2 1-3 ON ON ON ON ON OFF ON OFF ON ON OFF OFF OFF ON ON OFF ON OFF OFF OFF ON OFF OFF OFF Note: To change the setting of a DIP switch, first turn off the printer, change the DIP switch setting, and then turn the printer back on. 3-22 Using the Printer