Epson PP-50BD Users Guide - Page 10
Using the Product, Do not place any drink or liquid on the product as penetration by liquid inside
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
❏ Avoid places subject to dust, shocks, vibrations, or cigarette smoke. ❏ Leave enough room around the product to allow for sufficient ventilation. ❏ Place the product near a wall outlet where the plug can be easily unplugged. Using the Product Observe the following when using the product: ❏ Do not insert objects in the product. ❏ Take care not to spill liquid on the product. ❏ Do not use aerosol products that contain flammable gases inside or around this product. Doing so may cause fire. ❏ Always turn the product off using the P power button. When this button is pressed, the power light flashes. Do not unplug the product or turn off the power to the outlet until the power light stops flashing. ❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing. ❏ Before closing the disc cover, make sure that there is no disc left near stacker 3 and that discs in stacker 3 are not slanted. Otherwise, an error may occur when you close the disc cover. ❏ Be careful not to trap your fingers when closing the disc cover. ❏ The product uses galvanized sheet metal, and this may cause rusting at the edges; however, this does not cause any harm to the function of the product. ❏ Do not place any drink or liquid on the product as penetration by liquid inside the product will cause a malfunction. ❏ For PP-50BD: Do not open disc cover while running a job (busy indicator is flashing), unless the application instructs you to add or remove discs. This may affect write quality or print quality. Also, for safety reasons, do not put your hands inside the product while it is beeping, as the arm is still moving. ❏ For PP-50: When you have opened the disc cover while running a job (busy indicator is flashing), make sure that internal light has turned off and that the arm has stopped moving before performing any operation such as loading or taking out discs. Do not put your hands inside the product or operate stackers while the arm is moving. Also, open and close the disc cover gently. Important Notice and Safety Instructions 10