Epson PP-50BD Users Guide - Page 84
Cleaning Your Product, Cleaning the Exterior of the Product
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Cleaning Your Product Cleaning the Exterior of the Product To keep your product operating at its best, clean it thoroughly several times a year by using the following procedure. c Caution: ❏ Never use alcohol or thinner to clean the product. These chemicals can damage the product. ❏ Take care to prevent water from getting inside the product. If moisture, dirt, or other matter gets inside of the product, besides affecting print quality, it may cause the electric circuits to short. 1. Make sure the product is turned off and all the lights are off, and then unplug the power cord from the electrical outlet. 2. Use a soft, clean cloth to carefully remove any dust or dirt. If the dirt does not come off, clean it using a soft, clean cloth dampened with a mild detergent. Then, wipe the outside of the product dry with a dry, soft cloth. Note: ❏ After cleaning the product, close the disc cover to protect the product from dust. ❏ Make sure to clean the filter that is located on the rear of the product at regular intervals. See the next section. Maintaining Your Product 84