Epson PP-50BD Users Guide - Page 67
Taking Out Discs, Open the disc cover.
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Taking Out Discs Follow the steps below to take out the published/read discs from the stackers. 1. Open the disc cover. 2. Take out the stacker only when the output stacker is stacker 2. 3. Take out the published/read discs from the stacker. The output stacker differs according to the publish mode. Refer to the following table. Output stacker Stacker 2 Stacker 3 Stacker 2 Publish mode Standard mode Read Back mode Standard mode Low-volume mode Stacker 3 Number of discs Up to about 50 discs Up to about 20 discs Note: ❏ Once the output stacker becomes full, the job is paused. The job is resumed automatically if you take out the published discs from the stacker. ❏ Be sure to let printed discs dry completely before using them or touching the printed surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24 hours. ❏ If the print position is misaligned, adjust it using the printer driver. For details, refer to the printer driver Help. ❏ If the ink smears, adjust the color saturation. For details, refer to the printer driver Help. Publishing Discs 67