Epson PP-50BD Users Guide - Page 102
Horizontal Banding, Vertical Misalignment, Banding, See Cleaning the Print Head
View all Epson PP-50BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Horizontal Banding ❏ Make sure the printable side of the disc is face up in the stacker. ❏ Run the head cleaning utility to clear any clogged ink nozzles. & See "Cleaning the Print Head" on page 80. ❏ Use ink cartridges within six months after opening the packages. ❏ Use genuine Epson ink cartridges. ❏ Check the H Ink light. If the light is on, replace the appropriate ink cartridge. & See "Replacing an Ink Cartridge" on page 75. ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product. & See "Publishing Discs" on page 26. Vertical Misalignment ❏ Run the print head alignment utility. & See "Aligning the Print Head" on page 82. ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product. & See "Publishing Discs" on page 26. Banding ❏ Make sure the printable side of the disc is face up in the stacker. ❏ Run the head cleaning utility to clear any clogged ink nozzles. & See "Cleaning the Print Head" on page 80. ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product. & See "Publishing Discs" on page 26. ❏ Due to the variation in the quality of discs, print results using the same type of discs from the same data may not be the same. Troubleshooting 102