Epson PowerLite Home Cinema 750HD User Manual - Page 111
Power light, Lamp light, Temperature, Status and solution, light, High Altitude Mode
View all Epson PowerLite Home Cinema 750HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Power light Red Lamp light Off Temperature light Red Red Flashing red Off Light status varies Red Flashing orange Off Off Flashing red Red or flashing Flashing red Flashing red red Status and solution Projector has overheated and turned off. Leave it turned off to cool down. Once the temperature light turns off and the power light turns orange (after about five minutes), try the suggestions below: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Internal projector error. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. 111