Epson PowerLite Home Cinema 750HD User Manual - Page 47
Charging the 3D Glasses, 3D Viewing Range, USB-A, Parent topic
View all Epson PowerLite Home Cinema 750HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable. 2. Connect the other end of the cable to the USB-A port on the projector. Note: The projector must be turned on to charge the glasses. The glasses are fully charged when the status light on the glasses stays green. Parent topic: Viewing 3D Images 3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 47
Charging the 3D Glasses
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
1.
Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Note:
Make sure you connect the cable in the correct orientation or you may damage the glasses or
cable.
2.
Connect the other end of the cable to the
USB-A
port on the projector.
Note:
The projector must be turned on to charge the glasses.
The glasses are fully charged when the status light on the glasses stays green.
Parent topic:
Viewing 3D Images
3D Viewing Range
When you view 3D images, make sure you are positioned within the viewing range shown here.
47