Epson PriorityFAX 3000 User Manual - Page 104
Copying, photo modes.
View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Copying Troubleshooting Nothing comes out of the paper slot. • The paper roll may not be inserted properly. See Chapter 1. • The recording paper may be jammed. Push down on the paper cover button to open the fax machine. Pull out the jammed recording paper. Use scissors to make a clean edge on the end of the paper roll. Reinsert the paper according to the instructions in Chapter 1. No image appears on the paper. • The paper roll may be inserted upside down. See Chapter 1. • Be sure that you inserted the document in the feeder face down. Try copying again. Print quality of the copy is poor. • You may be using the wrong type of paper. Use Epson PriorityFax recording paper for best results. After checking the type of paper you are using try the following steps: Make another copy, but change the resolution setting as described in Chapter 2. For detailed drawings or photos, use the fine or photo modes. Clean the inside of the fax machine as described in Chapter 6 and make another copy. If neither of these methods improves the image quality, take the fax machine to an authorized Epson Customer Care Center. To find the location of the nearest Customer Care Center, call 1-800-922-8911.