Epson PriorityFAX 3000 User Manual - Page 52
Erasing Numbers and Names, Using the PriorityFax, number
![]() |
View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Using speed dial faxing Erasing Numbers and Names Erasing Numbers Using the PriorityFax After you have registered the speed dial numbers, you can send a fax to any of those numbers in just three steps: Insert the document face down in the feeder. The ready display appears. Press S. DIAL Press the two numbers on the keypad corresponding to the number you want to use and press START. If you have not registered a number for the button you pressed, the message NOT REGISTERED appears. When you press START, the fax machine starts feeding the first page and starts dialing. If the receiver's fax machine answers, the PriorityFax starts transmission automatically. If the receiver's fax machine is busy, the Priorityfax automatically enters the automatic redial mode. You can also use the speed dial buttons for dialing after pressing SPKR or lifting the handset. (This is manual sending.) In this case, you need to press START after hearing the fax tone from the receiver's fax machine, and it will not enter the automatic redial mode. If you wish to erase a fax number, a telephone number, or a name, use the instructions in this section. To erase a number follow these steps: If not already shown, bring up the number on the display. Make sure the cursor is under the first number of the item you wish to erase. Press PAUSE three times to erase the number. You may now enter a new number. If you would rather return to the date/time display without entering a new number, press SET three times. 2-25
![](/manual_guide/products/epson-priorityfax-3000-user-manual-7070a30/52.png)