Epson PriorityFAX 3000 User Manual - Page 41
Manual Reception, Basic Procedures, Setting the Date and Time, FUNCTION0-8?
![]() |
View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
PriorityFax 3000 Manual Basic Customizing Procedures Setting the Date and Time If the other party is telephoning you and not trying to send a fax, simply use the PriorityFax as an ordinary telephone, but if the other party wants to send you a fax or if you hear a constant tone from the other party when you lift the handset press START and hang up. The document you are receiving begins appearing from the paper slot at the front of the fax machine; the automatic cutter cuts off each page as it is received; and the machine beeps once when transmission is complete. Do not touch the received document until it is completely out of the front paper slot. pulling on a document that is still coming out of the fax machine can decrease the quality of the printing. Don't worry about missing a fax if you leave the AUTO ANS switch off and are away and unable to answer your telephone. After ten rings with no answer, the fax machine begins automatic reception anyway. Note If a telephone connected in parallel with your fax machine is used during receipt of a document, the received document may include distorted characters. Now that you have been introduced to the basics of sending and receiving documents on your PriorityFax, you can begin customizing your fax machine. This section has the basic customizing features, and Chapter 4 has the more advanced ones. To set the correct date and time for the display, perform the following steps: Make sure no document is in the machine. Press FUNCTION. You see the following display: FUNCTION(0-8)? Press 6 to choose date and time setting. You see the following display: 2-14
![](/manual_guide/products/epson-priorityfax-3000-user-manual-7070a30/41.png)