Epson PriorityFAX 3000 User Manual - Page 18
Installing the Output Tray and Paper Rest, documents on the table or other surface you are using
View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the Output Tray and Paper Rest Installing the output tray Setting Up the PriorityFax There are two types of paper holders for the PriorityFax: the output tray for holding documents sent to or copied by you, and the paper rest for holding documents you have just sent to others. The larger of the two paper holders, the output tray, receives incoming and copied documents. You can position the output tray at a 90° angle to the fax machine at the front edge of the table you are using, so that incoming or copied documents fall directly into the output tray. Note: Using the output tray is optional. If you install only the output tray base, you can collect incoming or copied documents on the table or other surface you are using for the fax machine. To install the output tray base and the output tray, follow these steps: Place the output tray base on the table in front of you, with the tabs on the output tray base pointing away from you. Then insert the wire output tray paper guide into the holes on either side of the output tray base so that the bend in the wire paper guide points toward you, as shown in the following illustration. 1-5