Epson PriorityFAX 3000 User Manual - Page 60
Using Standard Dialing, button, follow these steps
![]() |
View all Epson PriorityFAX 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Using Standard Dialing Using the PriorityFax as a Telephone Move the switch left to H for higher volume and right to N for lower (normal) volume. To adjust the ringer switch Locate the RINGER switch on the left side of the telephone cradle to the right of the HANDSET switch. Move the switch left to H for high, center to L for low, or right to OFF for no ringing. There are two ways to start dialing a telephone call: lifting the handset or pressing the SPKR button. To use the handset, simply lift the handset off the cradle, wait for a dial tone, and dial the number. To use the SPKR button, follow these steps: Press SPKR. Leaving the handset in its cradle, wait for the dial tone, and then dial the number. Note Remember that you can adjust the speaker volume by moving the dial on the back control panel of the fax machine. When you hear the number start ringing, lift the handset. The PriorityFax does not act as a speaker phone. You cannot speak to someone on the other end without using the handset. 3-5
![](/manual_guide/products/epson-priorityfax-3000-user-manual-7070a30/60.png)