Epson Stylus C88 Quick Reference Guide - Page 25

Removing and Installing Ink Cartridges - cleaning

Get Epson Stylus C88 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C88 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Removing and Installing Ink Cartridges Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session. Caution: Leave the empty/low cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. 1. Make sure the printer is turned on (the green power light should be on, but not flashing). 2. Open the printer cover. 3. Press and release the ink button. The ink cartridge holder moves to the left, and the cartridge that needs to be replaced stops under the ink out mark. The power light flashes. Caution: To avoid damaging the printer, never move the print head by hand. Note: Don't hold down the ink button for more than 3 seconds, or the printer will start to clean the print head. If no cartridge needs to be replaced, the holder moves to the ink cartridge replacement position, shown on the next page. Go to step 5. Removing and Installing Ink Cartridges 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Removing and Installing Ink Cartridges
25
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
Caution:
Leave the empty/low cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1.
Make sure the printer is turned on (the green
power light should be on,
but not flashing).
2.
Open the printer cover.
3.
Press and release the
ink button.
The ink cartridge holder moves to the left, and the cartridge that needs to be
replaced stops under the
ink out mark. The
power light flashes.
Caution:
To avoid damaging the printer, never move the print head by hand.
Note:
Don’t hold down the
ink button for more than 3 seconds, or the printer will start
to clean the print head.
If no cartridge needs to be replaced, the holder moves to the ink cartridge
replacement position, shown on the next page. Go to step 5.