Epson Stylus COLOR 1160 Printer Basics - Page 48

with step 9., repeat steps 3 through 7 before continuing - cartridges

Get Epson Stylus COLOR 1160 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus COLOR 1160 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

5. Unwrap the new ink cartridge. Then remove only the yellow part of the tape seal on top. You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. black cartridge color cartridge (S020189) (S020191) 6. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. 7. Press down the ink cartridge clamp until it locks in place, but don't press down on the cartridge itself. 8. If you need to replace the other ink cartridge, repeat steps 3 through 7 before continuing with step 9. 9. Press the R cleaning button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. The Ppower light flashes, and the printer makes noise. Charging takes about 30 seconds. When it's finished, the Ppower light stops flashing and stays on. Never turn off the printer while the Ppower light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
43
5.
Unwrap the new ink cartridge. Then remove
only
the
yellow part of the tape seal on top.
6.
Lower the new ink cartridge into its holder
with the label facing up and toward the back
of the printer.
7.
Press down the ink cartridge clamp until it
locks in place, but don’t press down on the
cartridge itself.
8.
If you need to replace the other ink cartridge,
repeat steps 3 through 7 before continuing
with step 9.
9.
Press the
R
cleaning button and close the
printer cover. The printer moves the print
head and begins charging the ink delivery system.
The
P
power light flashes, and the printer makes noise. Charging takes about
30 seconds. When it’s finished, the
P
power light stops flashing and stays on.
Never turn off the printer while the
P
power light is flashing,
unless the printer hasn’t moved or made noise for more than
5 minutes.
black cartridge
(S020189)
color cartridge
(S020191)
You must remove the yellow tape
from the top of the cartridge or you
will permanently damage it. Don’t
pull off the blue portion or try to
remove the clear seal underneath
the cartridge.