Epson Stylus Pro 7900 Proofing Edition Setup Guide ( Epson SpectroProofer &tra - Page 27

Maintenance and Problem Solving | 27 Error Messages If a problem occurs with the SpectroProofer, you may see a message on the printer's LCD display. Check the following list for an explanation and instructions for solving the problem: Message ILS20EP DISCONNECTED REFER TO THE MANUAL AND CONNECT ILS20EP TO SpectroProofer ILS20EP DISCONNECTED DO YOU CONTINUE? Explanation The spectrophotometer (ILS20EP/ILS20EPUV) is not connected correctly. The spectrophotometer (ILS20EP/ILS20EPUV) is not connected correctly. DEVICE ALIGNMENT ADJUSTMENT NOT COMPLETE SProofer DISCONNECTED CONNECT THE SpectroProofer TO THE PRINTER AND RESTART THE PRINTER SProofer DISCONNECTED DO YOU CONTINUE? The initial settings have not been made for the SpectroProofer. The SpectroProofer is not connected to the printer correctly. The SpectroProofer is not connected to the printer correctly. SpectroProofer ERROR Error No. 01 The SpectroProofer is not connected correctly. Response Turn the printer off, reinstall the spectrophotometer, and turn the printer back on. Select YES to continue printing without using the SpectroProofer. Or select NO, turn the printer off, reinstall the spectrophotometer, and turn the printer back on. See page 19. Turn the printer off, then connect the SpectroProofer and turn the printer back on. Select YES to continue printing without using the SpectroProofer. Or select NO, turn the printer off, connect the SpectroProofer, and turn the printer back on. Turn the printer off and check to make sure the SpectroProofer is connected correctly. Turn the printer back on. If the error appears again, contact Epson as described on page 29. 27