Epson SureColor F7200 User Manual - Page 150
Print Head Moves But Nothing Prints, Media is Creased, Related references, Motor Self Adjustment
![]() |
View all Epson SureColor F7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Related references Network Setup Menu Settings Print Head Moves But Nothing Prints If the print head is moving and nothing prints, try these solutions: • Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the printer has not been used for a long time the nozzles may be clogged.) • If you see the message Motor Self Adjustment on the product's LCD screen, the printer is adjusting its internal motor. Wait a few moments for the message to disappear and do not turn off the printer. Parent topic: Solving Printing Problems Related tasks Checking for Clogged Print Head Nozzles Cleaning the Print Head Media is Creased If media loaded in your printer is creased, try these solutions: • Check that the Feeding Tension and Feed Speed settings on the product control panel are correct for the currently loaded media. • If you printed thin media or media lengthened by water absorption at a high density take-up setting, creases that look like this may appear in the media in the after heater: Set the Take-up Tension setting to Manual and decrease the tension values, or print on thicker media. • Make sure the after heater temperature is not set too high for the media. 150
![](/manual_guide/products/epson-surecolor-f7200-53b1173/150.png)