Epson SureColor F7200 User Manual - Page 70
Print Media List
![]() |
View all Epson SureColor F7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly. Setting Media Remaining Select Media Customize Settings RIP Settings Print Media List Options Remaining Setup Length Remaining Alert Print Remaining Length 1 to 30 RIP Settings - - Print Description Displays and records the amount of media remaining on a roll. Enter the total roll length, from 3 to 3280 ft (1.0 to 999.5 m). Enter the length at which the printer will alert you, from 4 to 50 ft (1 to 15 m). Prints the amount of media remaining on the current roll before you replace it. Selects a number for the settings bank to use for printing. Specifies using the software RIP settings instead of the printer settings. See the next table. See the third table. Prints the contents of media setting banks 1 to 30. Customize Settings options Options Current Settings Setting Name Feed Adjustment Platen Gap Description Changes settings for the currently selected media. Enter a name up to 22 characters for the media settings bank. Select Manual if banding persists after head cleaning and alignment . Select 2.0 for most media. Select 1.5 if print quality is unsatisfactory. Select 2.5 only if printouts are scratched or smudged. Choosing a larger gap than necessary can cause ink stains inside the printer, reduced print quality, or shorter product life. 70
![](/manual_guide/products/epson-surecolor-f7200-53b1173/70.png)