Epson SureColor F7200 User Manual - Page 38

Saving Sets of Media Settings You can store sets of media settings for each type of media you use. This lets you quickly select all the necessary settings whenever you print on that media type. The media settings include the options selected and stored for each media bank or RIP setting you created. Note: Make sure that you loaded the media type for which you are selecting settings. 1. Press the Menu button on the product control panel. 2. Select the Media Setup menu and press the OK button. 3. Press the up or down arrow button to select Customize Settings and press the OK button. 4. Press the up or down arrow button to select a number for the set of media settings (from 1 to 30) and press the OK button. 5. Select Setting Name and press the OK button. 6. Press the up or down arrow button to display the letters and symbols you can use to name the media set. When you see the desired character, press the right arrow button to move to the next character position and repeat this step as necessary to complete the setting name. When you finish, press the OK button. Note: If you need to delete the previous character, press the left arrow button. 7. Press the up or down arrow button as necessary to select each available media setting and press the OK button. If necessary, press the back button to return to the menu to select additional settings. Parent topic: Media Handling Related tasks Loading Media Printable Area and Media Size Checking The left and right edges of media recognized by your product vary depending on the Media Size Check setting. • When the Media Size Check setting is turned on, your product automatically detects the left and right edges of the media within 0.2 inches (5 mm), as long as the media holding plates are attached correctly. 38