Epson SureColor F7200 User Manual - Page 72

Options Feeding Tension Take-up Tension Feed Speed Prevent Sticking Restore Settings RIP Settings options Options Platen Gap Head Alignment Roll Type Description Select Auto for most media. When you select Manual, you can set a value from 0 to 40. If media creases, set the value higher than Lv28. If banding appears, set the value lower than Lv28. When Media Size Check is off, select Manual and set the value based on the media width. Select Auto for most media. When you select Manual, you can set a value from 1 to 6. If media wrinkles, banding appears, or ink sticks to the back of the take-up roll, set the value lower than Lv3. If thick media cannot be wound correctly, set the value higher than Lv3. Select Lv2 for most media. Select Lv1 for thin media if it is creased, torn, stuck together, or if horizontal banding appears. Select On only if the media sticks to the platen when the printer is turned on or when printing starts. Select Yes to return all settings for the selected media to their default values. Description Select 2.0 for most media. Select 1.5 if print quality is unsatisfactory. Select 2.5 only if printouts are scratched or smudged. Choosing a larger gap than necessary can cause ink stains inside the printer, reduced print quality, or shorter product life. Enter a media Input thickness value from 4 to 40 mil (0.1 to 1.0 mm). Select Printable Side Out or Printable Side In based on how the media is rolled 72