Epson SureColor F7200 User Manual - Page 41
Printing the Amount of Media Remaining, Aligning the Print Head, Print Remaining Length - printer manual
View all Epson SureColor F7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Printing the Amount of Media Remaining After you print, you can print the amount of media remaining on the leading edge of the remaining roll. This lets you enter the number the next time you load the media for the most accurate accounting of the media remaining on each roll Note: You must have turned on the Remaining Setup setting on the product control panel to calculate the amount of media remaining. 1. Make sure your product is ready to print. 2. Press the media setup button, select the Media Remaining setting in the displayed menu, and press the OK button. 3. Select the Print Remaining Length setting and press the OK button. 4. Press the OK button to print the amount of media remaining. Parent topic: Media Handling Related references Printer Setup Menu Settings Aligning the Print Head If your printouts are grainy or out of focus, you need to align the print head. The thickness of your print media determines the alignment options you select. You can store separate alignment values for each type of media you use for quick selection. Before aligning the print head, make sure you have correctly loaded the media you plan to print on. 1. Press the Menu button. 2. Select Media Setup and press the OK button. 3. Press the up or down arrow button to select Customize Settings and press the OK button. 4. Press the up or down arrow button to select the number of the media settings you selected for the currently loaded media. Then press the OK button. 5. Press the up or down arrow button to select Head Alignment and press the OK button. 6. Press the up or down arrow button to select one of these adjustment methods and press the OK button: • If you are printing bidirectionally on your media, select the Manual(Uni-D) setting. If the print quality has not improved, repeat the steps here and select the Manual(Bi-D) setting. 41