Epson U220B Technical Reference - Page 68
Starting the memory switch setup mode, 4.4.2, Ending memory switch setting mode
View all Epson U220B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3.4.4.1 Starting the memory switch setup mode Use the following procedure to start the memory switch setup mode. 1. Open the roll paper cover. 2. Turn the power on while pressing the paper FEED button. 3. Press the FEED button twice while POWER, ERROR, and PAPER OUT LEDs are lit. 4. Close the cover. The printer prints the enabled settings of the memory switches and instructions. 5. Follow the instructions to process the switch setup. Note: In the memory switch setup, the paper out LED may be flashing. The flashing time indicates "The times of FEED button is pressed before the roll paper cover is closed." 3.4.4.2 Ending memory switch setting mode Once the setting is performed, the contents of the setting are stored. Then the printer initializes. When initialization is finished, the printer returns to normal operating mode. 3-22 Setup Rev. D