Epson U220B Technical Reference - Page 79
Ethernet interface - u220 ethernet
View all Epson U220B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3.4.8.4 Ethernet interface The following view shows the part names of the UB-E01. TM-U220 Technical Reference Guide 10BASE-T Ethernet interface connector LED (green) LED (red) Be sure not to push the LEDs by accident Switch If you press and hold this switch when the printer is on, the interface will be reset to the factory settings Before connecting any of the cables, make sure that both the printer and the host computer are turned off. 1. Make sure both the printer and the host computer are turned off. 2. Plug the 10BASE-T cable connector securely into the UB-E01's 10BASE-T Ethernet connector until you feel it click. CAUTION: Do not connect a telephone line , a display module cable, or a drawer kick-out cable to the UB-E01's 10BASE-T connector. Note: The display module connector on the TM printer cannot be used when the UB-E01 is installed. 3. Connect the power supply to the printer. Rev. D Setup 3-33