Epson WorkForce ES-580W Users Guide - Page 128
Close the separation roller cover until you hear it click into place.
![]() |
View all Epson WorkForce ES-580W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
9. Wipe off any dust or dirt on the separation roller using a genuine Epson cleaning kit or a soft, moist cloth. Caution: Use only a genuine Epson cleaning kit or soft, moist cloth to clean the roller; using a dry cloth may damage the surface of the roller. 10. To replace the separation roller, insert the end of the roller into the hole on the right side and lower the other end of the roller into place. 11. Close the separation roller cover until you hear it click into place. Note: If you are not able to close the cover, the roller is not installed correctly. Remove the roller and reinstall it, then try to close the cover again. 128
![](/manual_guide/products/epson-workforce-es580w-users-guide-b5dea46/128.png)
128
9.
Wipe off any dust or dirt on the separation roller using a genuine Epson cleaning kit or a soft, moist
cloth.
Caution:
Use only a genuine Epson cleaning kit or soft, moist cloth to clean the roller; using a dry
cloth may damage the surface of the roller.
10. To replace the separation roller, insert the end of the roller into the hole on the right side and lower
the other end of the roller into place.
11. Close the separation roller cover until you hear it click into place.
Note:
If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.