Epson WorkForce ES-580W Users Guide - Page 152

6. Close the scanner cover. 7. Carefully follow all loading instructions when you reload originals. If originals jam in the scanner frequently, try the following: • Select on the scanner control panel to slow down the scanning speed. • Turn off the Detect Double Feed setting. • Clean inside the scanner and clean the rollers. • Close the output tray and let the originals fall freely onto the surface below the scanner. • If the roller counter is nearing end of life, replace the roller assembly kit. Parent topic: Solving Scanning Problems Related references Original Document Specifications Plastic and Laminated Card Specifications Special Original Specifications Where to Get Help (U.S. and Canada) Where to Get Help (Latin America) Related tasks Cleaning Inside Your Scanner Related topics Loading Originals Paper Protection Does Not Work Correctly To reduce damage to the original, the Paper Protection feature immediately stops scanning if a paper feed error is detected. If the Paper Protection feature does not work correctly, try these solutions: • If your scanned original is damaged, make sure that the Paper Protection feature is enabled. Increase the detection level, if necessary. • If misdetection occurs frequently, lower the Paper Protection detection level . • Set the Paper Protection feature to Off on the LCD screen (Settings > Scanner Settings > Paper Protection > Off) when scanning plastic cards and thick originals. • When scanning multiple originals, make sure that the leading edges of the documents are aligned. If the leading edges of the documents are not aligned, they may be mistakenly detected as a paper feed error even if they are scanned correctly. 152