Epson WorkForce ES-580W Users Guide - Page 68
Using WPS to Connect to a Network, Wi-Fi Networking, Wi-Fi Protected Setup WPS
![]() |
View all Epson WorkForce ES-580W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Using WPS to Connect to a Network Using WPS PIN Mode to Connect to a Network Parent topic: Wi-Fi Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router, you can use Wi-Fi Protected Setup (WPS) to connect your scanner to the network. 1. Select home, if necessary. 2. Press the icon. 3. Select Router. 4. Select Start Setup or Change Settings. 5. Select Push Button Setup (WPS). 6. Follow the instructions on the LCD screen to complete WPS setup. Note: Make sure you press Start Setup within two minutes of activating WPS on your router. 7. Select the return home icon to return to the home screen. The Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the product is not connected to the network, repeat these steps to try again. Parent topic: Wi-Fi Protected Setup (WPS) Related tasks Setting Up Network Scanning Using WPS PIN Mode to Connect to a Network If you have a WPS-enabled wireless router that supports PIN mode, you can use Wi-Fi Protected Setup (WPS) PIN mode to connect your scanner to the network. 1. Select home, if necessary. 2. Press the icon. 3. Select Router. 4. Select Start Setup or Change Settings. 5. Select Others. 68
![](/manual_guide/products/epson-workforce-es580w-users-guide-b5dea46/68.png)