Epson WorkForce ES-580W Users Guide - Page 40
Settings, Scanner Settings, Paper Protection, on the LCD screen.
View all Epson WorkForce ES-580W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
• 215 to 240 inches (5461 to 6096 mm): 200 dpi or less 8. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the ejected originals. Note: If thicker paper does not eject properly or falls from the output tray, push in the output tray and allow the originals to eject freely onto the surface below the scanner. If the scanned images are affected by the originals ejecting below the scanner, try placing the scanner on the edge of a table where the ejected originals can drop freely. If scanning thin or wrinkled paper causes paper jams or double feeds, slow down the feeding speed by selecting Settings > Scanner Settings > Slow > On on the LCD screen. If a paper feed error is detected, the Paper Protection feature stops the scanning process automatically to reduce damage to the original. To change the Paper Protection detection level, select Settings > Scanner Settings > Paper Protection on the LCD screen and select the desired level. 40