Epson WorkForce ES-580W Users Guide - Page 69
Setting Up Network Scanning, PIN Code SetupWPS
![]() |
View all Epson WorkForce ES-580W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
6. Select PIN Code Setup(WPS). 7. Follow the instructions on the LCD screen to complete WPS setup. Note: Make sure you press Start Setup within two minutes of activating WPS on your router. 8. Select the return home icon to return to the home screen. The Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the product is not connected to the network, repeat these steps to try again. Parent topic: Wi-Fi Protected Setup (WPS) Related tasks Setting Up Network Scanning Setting Up Network Scanning You can set up network scanning to your scanner through a direct connection to your scanner. First, manually configure your scanner to connect to your network. Then follow the instructions here to set up your computer for network scanning using the Epson Scan 2 Utility. Your scanner must be turned on and connected to the network. Note: Make a note of the IP address or host name of the scanner so you can enter it in these steps. 1. Do one of the following to start the Epson Scan 2 Utility: • Windows 10: Click > EPSON > Epson Scan 2 Utility. • Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility. • Windows 7: Click > All Programs > EPSON > Epson Scan 2 > Epson Scan 2 Utility. • Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility. 2. Select Settings from the Scanner drop-down list. 69
![](/manual_guide/products/epson-workforce-es580w-users-guide-b5dea46/69.png)