Epson XP-8500 Users Guide - Page 44
Using WPS to Connect to a Network, Parent topic, Wi-Fi Recommended, Push Button Setup WPS
View all Epson XP-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the home button, if necessary. 2. Press the icon. You see a screen like this: 3. Select Wi-Fi (Recommended). 4. Select Push Button Setup (WPS). 5. Follow the instructions on the LCD screen to complete WPS setup. 6. Press the home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. 44